Marmorino – by Proton Luxury Decorative Paints

Technical Data Sheet

  1. Product description:

MARMORINO is decorative stucco for external and internal surfaces, consisting of fine-grained marble powders, pure mineral substances, inorganic pigments and organic binder in the concentration of 5%, with matt and semi-shiny final appearance.

Its chemical and physical nature makes it anti-mold and anti-algae, compatible with sustainable building and construction rules, as it is a natural mineral product, ideal for the restoration of old historical buildings.

  1. Application area:

MARMORINO may be applied directly on clean plaster, on solid or old paint (e.g. lime, silicates etc.), provided that they are absorbent and non-chalking.

If the surface is chalked, it should be first consolidated with PRIMER HP P05, diluted with water in the proportion 1:1.

  1. Product characteristics:

Technical details:

  • specific weight: 1.64 kg/L
  • Vapour permeability resistance sd < 0.02 m
  • Organic additives: < 5 %
  1. Surface preparation:

The surface for the application has to be mineral, solid, dry and absorbent. Remove detaching and deteriorated parts. Eliminate algae, fungi and mosses, old organic paints or any micro-cracks by applying one coat of PRIMER S P02.

  1. Application:

MARMORINO is ready to use. It only has to be slowly stirred before use.

The application is carried out with a stainless steel spatula, in two or more coats, at an interval of 6-8 hours. After the material has set, i.e. after approximately 5 hours, or on the next day, it needs to be vigorously abraded with a stainless steel spatula until obtaining the desired matt and semi-shiny effect.

MARMORINO is a highly breathable product. In order to apply it outdoors it is necessary to protect it against adverse weather conditions by applying one coat of DECORVELATURA.

  1. Conditions of the application:

Do not apply the product at the temperatures below + 8°C of the air and of the surface, both during the application and during the drying phase. Do not apply it in strong sunlight or on the surfaces strongly overheated by the sunlight, rain and/ or wind.

  1. Consumption:

used for the surface preparation and base: ca. 0.400 kg/m2.

used on smooth plaster ca: 0.200 kg/m2 per coat.

However, the exact valuation is possible only after analysing the samples.

  1. Cleaning the accessories:

Immediately after use, with water.

  1. Packaging:

Buckets: 8 kg and 24 kg

  1. Storage:

12 months in a warehouse, in a cool and dry place and in closed containers. Avoid frost. Protect against heat and direct exposure to sunlight.

  1. Example of a specification text

Application of MARMORINO: it is to be applied in at least three coats of the thickness necessary to obtain the desired finishing effect, and it has to be smoothed until obtaining a smooth and specular surface. In the case of the external surfaces exposed to adverse weather conditions, such surfaces have to be protected by further final application of DECORVELATURA, including materials and labour and excluding scaffoldings and surface preparation.


Write a Comment

Your email address will not be published. Required fields are marked *